PLASTIC RECYCLING MACHINE

0000154669_pE4trqPq

 

 

Features
  • Constant high pellet quality.
  • Saving. Less power consumption cost per kilogram, reduced floor space occupation and operator attendance.
  • High efficiency and high throughput. Combines three functions in one, such as shredding, extruding and palletizing. Many materials can be processed directly without need of upstream pre-shredding, resulting in a dramtic reduction in operational costs.
 
  • Applicable Materials: PP, HDPE, LDPE, LLDPE, TPV, EVA, ABS, and PS, etc.
  • Material Shapes: Film, bag, scrap, flake, etc
  • Material Types:  Film(rolls,loose,bundled), agricultural film waste, printed LDPE film, Woven bag, washed post-consumer waste,foamed plastics(EPS) and raffia, etc.
  • Alias: Plastic recycling equipment, plastic pelletizer, plastic granulating machine, plastic pelletizing line, plastic granulating line, plastic pelletizing system, plastic recycling plant

plastic recycling machine

Plastic Recycling Machine is State-of-the-art technology for high-value processing of plastic recycling. It is used for making the clean materials or washed material into pellets(granules), it also known as plastic reycling system, film recycling machine, film recycling line, film pelletizing machine, film pelletizing line, granulating line, granualation machine, waste plastic recycling machine, recycling machine, etc.

plastic recycling machine

This plastic recycling machine is consisted with conveyor, agglomerator, extruder, hydraulic screen changer, cutting system, centrifugal d

Technical Info of Plastic Recycling Machine
Model           R100 R120 R140 R160
Applicable Materials PP / HDPE / LDPE / LLDPE / EVA / ABS / PS
Actual throughput per hour PP=300kg
HDPE=350kg
LDPE=350kg
PP=380kg
HDPE=420kg
LDPE=450kg
PP=480kg
HDPE=520kg
LDPE=550kg
PP=650kg
HDPE=800kg
LDPE=750kg
METAL DETECTOR Optional
BELT CONVEYOR  
Type Rubber belt conveyor
Feed speed 0.05m/sec.
Drive motor 1.1kw 1.5kw 2.2kw 2.2kw
ROLL FEEDER Optional
AGGLOMERATOR  
Drive motor 55kw 75kw 90kw 110kw
EXTRUDER  
Main drive motor 90kw AC+INV 132kw AC+INV 160kw AC+INV 200kw AC+INV
Type With or without degassing system (venting hole)
Screw diameter (mm) Ø100mm Ø120mm Ø140mm Ø160mm
L/D ratio 30:1 30:1 28:1 28:1
Screw material 38CrMoAlA, nitrided and chrome plated
Barrel material 38CrMoAlA, precision ground and nitrided
Screw speed (rpm) 0-170 0-150 0-130 0-130
Barrel heater 33kw 45kw 55kw 60kw
Barrel cooling Air cooling
Cooling power 4kw 4.5kw 5kw 5.5kw
SCREEN CHANGER & DIE  
Type Single-plate hydraulic screen changer with double working position
Heater 6.4kw 7kw 7.5kw 8kw
Filter screener diameter Ø130mm Ø150mm Ø160mm Ø180mm
PELLETIZER  
Pelletizing type Die face water ring pelletiser for PE, underwater pelletiser for PP
Pelletizing motor 3-5 HP AC+INV
Die heater 3.2kw 3.8kw 4.8kw 6kw
Pelletizing hole dia. Hole dia. and numbers depend on material and palletizing type
COOLING DEVICE  
Type Water cooling
Water pump 3kw
Chiller Optional
DEWATERING&SORTING  
Dewatering motor 5.5kw
VIBRATING SCREENER Optional
TRANSPORT&STORAGE  
Blowing motor 2.2kw 3kw 3kw 3kw
Silo capacity 1M3

ewater machine, air sending system and silo. Metal detector, roll feeder, degassing system, chiller, vibrating screener are optional devices, it may be provided depends on the porpty of the material.